Model No. 8594
A Task Chair that keeps you comfortable all day.
The Lifeform® Lifestyles Contour Task chair has a built in lumbar roll to support the natural curve of your lower back and promote correct posture. Loaded with ergonomic features this chair will adjust to suit your needs throughout any task or activity.
Built-in Lumbar Support; Ratchet Back Height Adjustment.
Upholstered LIFE-Foam™ Memory Foam Arm Pads with Swivel Function; Height and Width Adjustable Arm Brackets.
High Density Foam Contoured Seat.
Centre Tilt Control Mechanism featuring: Forward Tilt, Pneumatic Seat Height Adjustment, Infinite Tilt Lock Function, Tilt Tension Adjustment, Infinite Back Angle Adjustment.
25” Five Star provides strength and stability, 50mm Dual Wheel Hooded Carpet Casters for smooth operation.
Upholstery – Dream Weave™, Staccato and NaugaSoft®.
Standard Model (shown): Dream Weave, Fabric or Simulated Leather – starts at $895
Standard Model: UltraFabrics – starts at $1,095
Standard Model: Regular Leather – starts at $1,395
Standard Model: Premium Leather* – starts at $1,495 * Embossed Leather available as an Insert Only – see Personalization for pricing
Browse Our Upholstery
Ergonomic Chair Function
This Video demonstration is for Chair Models 8594, 6794, 6694, 8794 and 8694.
Forward Tilt Lockout: allows user to engage or lock out Forward Tilt feature. Forward Tilt Function allows chair to tilt forward so user may achieve a comfortable working position that maintains proper circulation, reducing pressure on legs and thighs. This paddle/handle is the forward most on the chair mechanism. Tilt back and move lockout lever forward or backward to allow or lock out forward tilt feature.
Forward Tilt Lockout
Infinite Tilt Lockout: allows user to freely rock forward, backward or lock chair into any comfortable position. Tilt lock lever is located at front right of mechanism. Lifting paddle up allows chair to free float. Pushing paddle down locks chair in desired position.
Infinite Tilt Lockout
Seat Height: To Raise: with no weight on seat, lift middle paddle on right side. Seat will raise until you release the paddle or the seat reaches its maximum height. To Lower: while sitting on chair, lift middle paddle. Seat will lower until you release the paddle or the seat reaches its minimum height.
Infinite Back Angle: allows user to adjust angle of backrest while seated. Lift paddle and hold in upward position to engage, then release to lock paddle in any infinite position.
Infinite Back Angle
Back Height: allows user to adjust height of backrest while seated. Simply lift the backrest upwards to reach desired height. To reset the cycle, firmly lift the backrest until maximum height is reached, where the internal mechanism will reset and the back will drop down.
Tilt Tension: allows user to adjust the ease of recline. Tilt Tension Handle is located on left side of the mechanism. Turning the handle clockwise or counter-clockwise increases or decreases tilt tension.
Optional – Seat Slider Function: allows user to adjust the seat depth as preferred or for multi-user situations. Paddle located on left side of mechanism. Hold paddle upward to unlock seat slider. Pull seat forward or rearward to increase or decrease seat depth. Release the paddle at desired position to lock.
Seat Slider Function
Comes with built in lumbar roll.
Adjustable Lumbar Support
360 Degree Swivel: Your Lifeform chair rotates 360 degrees without obstruction. Use your feet to turn yourself around.
360 Degree Swivel
Height and Width Adjustable Arms: allows arm height and width adjustment. To adjust height, lift finger pull on outside of arm structure, then pull up to raise arms or push down to lower. To adjust width, loosen hand wheels located under arm bracket under the seat. Pull or push arms in our out. Tighten hand wheels when desired location is achieved.
Height and Width Adjustable Arms
Arm Swivel: to swivel arm pad inward, gently push on outside of arm pad. Push on inside to swivel out. Always make sure your arm pads are pushed completely outward before sitting down in your chair. Not doing so may result in damage.
33.5” – 40”
16” – 19”
17.5” – 21”
Width Between Arm Pads
17.5” – 21”
17” – 21”
Arm Pad Height from top of seat
6.5” – 9.5”
26.5” – 30”
Arm Pad Length
Arm Pad Width
10 ply curved plywood.
10 ply curved plywood.
HRPO Hot Rolled Steel meets or exceeds ANSI BIFMA, B S5459 PART 2 (formerly FIRA) and AFRDI standards.
HR foam meets CAL 117-2013 requirements.
Injection-molded glass reinforced nylon resin with steel inset.
400 Newton Force, 2 ¾” travel, meets/exceeds ANSI/BIFMA requirements.
Five Star Base:
Patented, composite with die cast metal bushing and beveled “step” inside the hub, meets/exceeds ANSI/BIFMA standards.
Twin wheels all nylon construction, steel axel and fastening, meets/exceeds ANSI/BIFMA standards. Optional urethane wheels for hard floors.
Have more questions about our luxury office chair products?